High Output Submersible Dirty Water Transfer Pump

High Output Submersible Sump Pumps:

In permanent installations, submersible pumps are often used in sumps as the pumps should not run dry. Sumps are chambers in the ground which are designed to fill with water, meaning the pump is submersed. If you do not have a chamber (and don’t wish to install one) but require water pumping to a low-level you need a special type of submersible pump, called a Puddle Pump. Puddle Pumps are specially designed for this and we have a separate section for these pumps. Sump Pumps can be installed either internally to manage flooding, or externally to manage a drainage system or help control groundwater flooding. Groundwater flooding is poorly understood, but it happens when high rainfall fills aquifers in the ground. Groundwater flooding can be mitigated against by installing a sump pump– helping to keep property dry.

How to choose a Submersible pump:

Firstly, evaluate the size of the area or how much water needs to be removed The main difference with the pump models are how quickly they can pump water (the flow rate). For example the BPS-80 model has a flow rate of 40ltrs a minute and the BCV3700-80 model has a flow rate of 1500ltrs a minute.

Select the correct pump for the liquid to be pumped, i.e. clean water, dirty water, salt water etc.

Will the pump be running 24-7? If so you may wish to look at our pond pumps which are specially designed for this.

Select the pump that clears the water to a depth you require. Puddle pumps can pump water as low 1mm whereas submersible pumps tend to be around 30mm.

Finally, assess how far you would need to pump the water away and ensure an adequate ‘head’. Per 10m of horizontal pumping, you can assume a 1m head loss.

When you have worked this out you should find it easy to find the right pump for the job.

If you are still unsure, you can give us a call and speak to one of our pump experts who will be more than happy to help you.

Submersible Dirty Water Pump

A crucial flood defence solution for properties subject to flood water rising below ground.

The submersible pump system is installed below ground to a bespoke sump. The pump has an integrated float switch which enables it to automatically switch itself on in the event of rising water, pumping water out and away from the premises.

Sump and Pump systems are often required for properties with basements or voids below the floor.

Directive Base Tension 2006/95/EC
Directive Compatibilité Électromagnétique 2004/108/EC
Directive ROHS 2002/95/EC
Tests executed in accordance with following regulations:
EN55014-1 :2006+A1
EN55014-2 : 1997+A1+A2
EN60335-1 : 2002+ A1+ A11+ A12+ A2+ A13+ A14+ A15
EN60335-2-41 : 2003+A1+A2
EN61000-3-2 : 2006+A1+A2
EN61000-3-3 : 2008
EN55014-1
EN55014-2
EN61000-3-2
•EN61000-3-3

3/4 HP Non-Submersible Super Max 1 In. Transfer Pump

This SLAPK High Output Super Max Transfer Pump has a solid cast iron body for low vibration and exceptional durability. This electric utility pump outperforms standard gas powered pumps with an instant electric start, quiet operation, zero dangerous fumes, and no engine maintenance*. This utility pump is ideal for draining water heaters, emptying sumps and all-purpose clear water removal. For maximum flow performance, use 1 in. intake and discharge hoses, sold separately.

Sump Pumps 1HP Plastic Well Submersible Dirty Clean Water Transfer Pump Heavy Duty Utility Pump

Thermoplastic body protect the metal parts from corrosion; Thermal overload protection make sure the pump operates within spec for longer durability; Oil Free Motor(no need to maintain).

1.0HP & 3566GPH (Gallons Per Hour) Pumping Capacity Quickly Moves Water Away From Locations, Powerful and More Time and Energy will be Saved. Comes with Three Different Outlet Size as the Two Fitting have Three Different Diameters for Outflow(1″ ,1.25″, 1.5″) to Choose from According to the Flow Rate.

Have Higher Base Plate Assures the Prevention of Debris Collection in the Sump Pit. Able to Pump Clean or Dirty Water, Garden Hose Attachment Allows for Immediate use. Outlet can be Adapted for Larger Hoses.

Automatic Float Switch for multiple applications as a standard submersible or automatic operation. Max Supple Height: 29.5Feet, Voltage/Frequency:115V/60HZ, Max Submersion Depth: 16.4FT. Power Cord Length: 16.4 Ft, Discharge bore:1.5 inch.

Great for Flooded Area, Swimming Pool, Pond, help you Out of the Worrying that your Dry Basement will be Effected on Rainy Days. Suitable for Both Fresh-Water and Salt-Water.