Service
08:00~24:00(Beijing)
Water Pump Direct Sale
Professional Submersible Pump Manufacturer
In order to meet the requirements on the development of the electric power, metallurgy and coal industries, our company has designed and developed WG(P) Series up-to-date general slurry pump with large capacity, high head, multi-stages in series to remove ash & sludge and to deliver liquid-solids mixture, based on the experience of slurry pump design and manufacture for many years, and abstracting the research results of advanced technology from home and abroad.
WG slurry pump is of horizontal, single stage, single suction, cantilevered, double casing, centrifugal slurry pump. The pump rotates in clockwise viewed from the drive end.
The wet parts of WG and WGP pump at the same outlet diameter can be interchangeable. Their outline installation dimensions are the same as well. For the drive part of WG(P) slurry pump, the horizontal split frame with oil lubrication and two sets of water cooling systems inside and outside has been adopted. If necessary, cooling water can be supplied.
MD series multistage pump can deliver the neuter mineral water with solids particles percent ≤1.5%(solids dia. <0.5mm) and other similar sewage, the temperature of the liquid is ≤80℃. It is suitable for steel works, mines,cities projects etc.
Capacity: Q: 3.75-840m³/h
Head: H: 19-680m
Cast iron, duct alloy, carbon steel, zinc free bronze, silicon brass or stainless steel construction (other materials available on request)
High efficiency double suction impeller
Durable, low noise, long life bearing
Premium quality mechanical seal
Electric or diesel drive
Large flow non-clog hydraulic components, which greatly improve the passing capacity of waste water
Double channel series mechanical seal made of hard anticorrosive tungsten carbide, which is durable and wear resistant
Built in cooling system allows operation when motor is submerged or above water level.
Fixed automatic coupling installation or movable installation available
150 WQ 100 – 40 – 30
150 – discharge diameter (mm)
WQ – submersible sewage pump
100 – capacity, m³/h
40 – head, m
30 – motor power, kw
Pump Model | Capacity (m3/hour) | Head(meter) | Power(KW) | Voltage(V) | Discharge DN(mm) |
WQ10-10-0.75 | 10 | 10 | 0.75 | 220/380 | 50 |
WQ7-15-1.1 | 7 | 15 | 1.1 | 220/380 | 50 |
WQ15-7-1.1 | 15 | 7 | 1.1 | 220/380 | 65 |
WQ12-15-1.5 | 12 | 15 | 1.5 | 380 | 50 |
WQ25-7-1.5 | 25 | 7 | 1.5 | 380 | 65 |
WQ9-22-2.2 | 9 | 22 | 2.2 | 380 | 50 |
WQ25-10-2.2 | 25 | 10 | 2.2 | 380 | 65 |
WQ40-10-2.2 | 40 | 10 | 2.2 | 380 | 80 |
WQ50-7-2.2 | 50 | 7 | 2.2 | 380 | 100 |
WQ15-30-3 | 15 | 30 | 3 | 380 | 50 |
WQ25-15-3 | 25 | 15 | 3 | 380 | 65 |
WQ37-13-3 | 37 | 13 | 3 | 380 | 80 |
WQ60-9-3 | 60 | 9 | 3 | 380 | 100 |
WQ15-32-4 | 15 | 32 | 4 | 380 | 50 |
WQ25-20-4 | 25 | 20 | 4 | 380 | 65 |
WQ30-36-4 | 30 | 36 | 4 | 380 | 80 |
WQ40-15-4 | 40 | 15 | 4 | 380 | 80 |
WQ60-10-4 | 60 | 10 | 4 | 380 | 100 |
WQ15-40-5.5 | 15 | 40 | 5.5 | 380 | 50 |
WQ25-35-5.5 | 25 | 35 | 5.5 | 380 | 65 |
WQ30-30-5.5 | 30 | 30 | 5.5 | 380 | 80 |
WQ65-15-5.5 | 65 | 15 | 5.5 | 380 | 100 |
WQ100-7-5.5 | 100 | 7 | 5.5 | 380 | 150 |
WQ45-22-7.5 | 45 | 22 | 7.5 | 380 | 80 |
WQ80-15-7.5 | 80 | 15 | 7.5 | 380 | 100 |
WQ100-10-7.5 | 100 | 10 | 7.5 | 380 | 150 |