5.5KW 50M3/H Submersible Pump Export to Thailand

Export to Thailand 5.5KW 50M3/H Submersible Pump data:

– Model 100WQ65-15-5.5
– 5.5 kW 380 V 50 Hz IP68 class F
– Flow rate 50 m3/hr tdh 15 m
– Efficiency 59%
– 1450 rpm
– Operation temp 45C
– Liquid density 1000kg/m3
– Viscosity 1mm2/sec
– Casing : SS420
– Impeller:SS420
– Shaft:SS420
– Discharge size 100 mm
– Pump complete with guiderail

5.5KW 50M3/H Submersible Pump Manufacturer:

Shenlong supply 100WQ65-15-5.5KW submersible sewage water pump for you with the same flow rate and lift head, including the same speed 1450rpm. But the mateiral we can supply is SS304, it’s more widely used in pump industry. Our factory main production 10 series sewage pumps: General sewage pump, non-clogging sewage pump, cutting sewage pump, automatic mixture sewage pump, auto-couple sewage pump, stainless steel sewage pump, non-clogging under-liquid sewage pump, water filled sewage pump, multistage bottom suction sewsage pump, mining sewage pump.

5.5KW 50M3/H Submersible Pump Advantages:

5.5KW 50M3/H Submersible Pump, the CAD technology is used to repeatedly modify the design, so that the submersible water pump body and the impeller are optimally matched, and the fibers and debris are easy to pass without being entangled and blocked. The impeller is strictly balanced, so that the electric submersible pump has low vibration and stable operation.

An overheating protection element is installed in the motor windings. When the winding temperature exceeds the specified temperature, the overheating protection element will turn on the “overheating” indicator light through the electric control cabinet and automatically shut down. Remind the operator to check to find out the cause of the motor overheating. After the temperature of the winding drops, the overheating protection element will automatically reset, and the motor can be turned on. However, it must not be turned on until the winding overheating is eliminated.