Service
08:00~24:00(Beijing)
Water Pump Direct Sale
Professional Submersible Pump Manufacturer
Water Pump Direct Sale
Professional Submersible Pump Manufacturer
They are suitable for moving subsoil water, stormwater, sewage, grey water, black water, trade waste, rainwater, bore water, chemicals and foodstuffs, by working with different designs for multiple applications, which include closed impellers, vortex impellers, contra-block impellers, single channel impellers, multi-stage, cutter, or grinder pumps. There is a wide selection available for different applications including low flow, high flow, low head (pressure) or high head.
E-mail: marketing@apkpump.com
WhatsApp: +86 175 3718 7726
Max. Flow: 630m3/ h
Max. Head: 44m
Maximum liquid temperature: +40 C
pH level from: 4-10
This series of WQ multi-stage submersible sewage pumps uses a new mechanical seal to efficiently transport solids and long fibers. The unique double-bladed impeller structure greatly enhances the ability of dirt to pass through, allowing it to transport sewage with solid particles. The float switch is designed to automatically control the start and stop of the pump based on the desired level change.
Max. Flow: 140m3/ h
Max. Head: 44m
Power frequency is 50Hz.Nominal voltage is 220VACfor single phase and 380VAC or 415VAC for three phase with the range from -10% to 10%.
Immersion depth from 0.5m-5m
WQ(D) multi-stage submersible sewage pump is designed, manufactured and inspected in strict accordance with relevant national standards. It can be used for water supply to industrial and commercial sewage, domestic sewage, urban sewage treatment plant drainage system, civil air defense system drainage station, and water supply plant.
Max. Flow: 35m3/ h
Max. Head: 98m
This WQ2 multi-stage submersible sewage pump can transport liquids containing hard solids and fibrous materials, as well as particularly dirty, sticky and slippery liquids such as swill, sewage, domestic wastewater, sewage, manure, and the like.
These heavy duty, cast iron pumps are perfect for waterfalls
All pumps available in 115v or 230v
One year warranty
10,000 hour operating life
Models (WQ50 – WQ1502)
33′ Power Cord
3″ Discharge
Use the information on this comparison chart to simplify selecting a pump for a given application. Selecting a pump involves a few steps:
Determine the flow need: multiply width (in feet) x 36 gpm = flow needed in gpm
Determine the head pressure in feet (the height the water will rise above the surface of the pond it is being pumped from
If multiple pumps fit your application you can compare cost to operate, outlet size, etc. finalize your selection.
